HOW TO SET THE TIME
1. Pull out the crown to the position [
3
]-
(2nd click)
.
(the watch stops).
2. Turn the crown until you reach the correct time.
3. Push and screw down crown back in the
position
[
0
].
HOW TO SET THE DATE
1. Pull out the crown to the position [
2
]-
(1st click)
.
(the watch continues to run).
2. Turn the crown until the correct date appears.
3. Push and screw down crown back in the
position
[
0
]
.
Please note: The date can be changed during the date
changing phase between approx. 9:00 PM and 12:00
PM; please note that the date must be set to the date
of the following day as in this case the automatic date
changing does not occur at midnight.
STOPWATCH FUNCTION
• The stopwatch measures up to 12 hours.
STANDARD MEASUREMENT
START
STOP
RESET
1
2
