2
11.
Always carry the saw in its de-energized state.
12.
Keep the saw handles dry, clean, and free of oil or fuel.
13.
Do not start cutting without first de-energizing electrical wiring near the cutting site or imbedded in the concrete.
14.
Before cutting through a wall, check both sides for possible obstructions.
15.
Prior to cutting, plan your cuts to prevent pinching of the bar or personnel injury from falling concrete.
16.
Always hold the saw with both hands during operation. Use a firm grip on the handles.
17.
Never exceed the flow and pressure rating of the saw which is 12gpm at 2500 psi.
18.
Do NOT attempt to adjust the saw during operation.
19.
Keep clothing and all parts of the body away from moving parts of this saw when connected to a power source or
being used.
20.
The slurry formed during cutting operations is very slick. Remove while still wet to prevent yourself or others from
slipping while cutting. Slurry that has been allowed to dry is very difficult to remove.
21.
Always shut off the hydraulic power and cooling water sources before disconnecting the hoses or servicing the saw.
22.
Always shut off the hydraulic and cooling water sources when not using the equipment.
Summary of Contents for C120 HYDRACUTTER
Page 29: ...26...
