Stock Code 873117 en.rgble.com 400-1661-021
r mac addr!
Get network MAC
address
Mac address: 00:1C: 91:03:80:01
s ip mode z!
Set network IP
mode to static IP or
DHCP, z=0~1 (z=0
Static, z=1 HDCP)
Set IP mode: Static.
Please use "s net reboot!" command or repower device
to apply new config!
r ip mode!
Get network IP
mode
IP mode: Static
s ip addr
xxx.xxx.
xxx.xxx!
Set network IP
address
Set IP address:192.168.1.100 Please use "s net
reboot!" command or repower device to apply new
config! DHCP on, Device can't config static address,
set DHCP off first.
r ip addr!
Get network IP
address
IP address:192.168.1.100
s subnet
xxx.xxx.
xxx.xxx!
Set network subnet
mask
Set subnet Mask:255.255.255.0 Please use "s net
reboot!" command or repower device to apply new
config!
DHCP on, Device can't config subnet mask, set DHCP
off first.
r subnet!
Get network subnet
mask
Subnet Mask:255.255.255.0
s gateway
xxx.xxx.
xxx.xxx!
Set network
gateway
Set gateway:192.168.1.1 Please use "s net reboot!"
command or repower device to apply new config!
DHCP on, Device can't config gateway, set DHCP off
first.
r gateway!
Get network
gateway
Gateway:192.168.1.1
s tcp/ip port
x!
Set network TCP/IP
port (x=1~65535)
Set tcp/ip port:8000
r tcp/ip port!
Get network TCP/IP
port
tcp/ip port:8000
s telnet port
x!
Set network telnet
port(x=1~65535)
Set telnet port:23
r telnet port!
Get network telnet
port
telnet port:23
s net reboot!
Reboot network
modules
Network reboot...
IP Mode: Static
IP: 192.168.1.72
Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1
Mac address: 00:1C:91:03:80:01 TCP/IP port=8000
telnet port=10
Note that you can send ‘RS232 command’ to control the Switcher via Serial Command tool. The
‘Function description’ explains function about the command. The “Feedback” displays whether
the command sends success or not and feedback the information you need to.
