RGBlink VSP 198CVS User Manual Download Page 121

Page: 121 / 122

VSP 198CVS User Manual 121

2. Communication Firmware Upgrade

Upgrade by copy the file, the form of the file is: .MCU, and upgrade steps are as follows:

(1) Connect the USB interface of VSP198CVS to the computer with a USB cable.

(2) Plug in the power cord, and make sure the device is in normal operation.

(3) Push MENU button, and enter [USB UPDATE] option, operation steps are:



SYSTEM



USB UPDATA



SEL.

(4) Open the USB drive that plug into the computer, and delete the "firmware. bin" file in

the USB drive, then copy the MCU file of VSP198CVS to the USB drive, program

loading is complete after the file has been copied.

(5) Restart the device, and enter the menu to check if the version is right, factory reset is

completed.

Operation steps are: MENU



SYSTEM



SYSTEM INFO



COM.VERSION.

3. CORE Panel Upgrade

Upgrade by copy the file, the name of the file is: VIDEO.fvb, and upgrade steps are as

follows:

(1) Connect the USB interface of VSP 198CVS to the computer with a USB cable.

Summary of Contents for VSP 198CVS



























































































































Search results

Summary of Contents for VSP 198CVS

Reviews:

Related manuals for VSP 198CVS

Brands by name

Popular brands

RGBlink VSP 198CVS, User Manual

Search results

Summary of Contents for VSP 198CVS

Reviews:

Related manuals for VSP 198CVS

Brands by name

Popular brands