RGBlink MSP 325H, Quick Start Manual

Page: 14 / 17

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
| support@rgblink.com | www.rgblink.com
13
6. Trouble Shooting
6.1 Cannot login in the WEB UI
If you cannot on open up the WEB UI, check the LAN port and see if it is lit up, if the LAN connection is fine,
but you still cannot open up the page, check your IP address and see if your computer is in the network of
192.168.1.XX, if not here is the method for you to manually check and change your IP address.
Check your IP address
Step 1. Press W X keys together and open Windows
PowerShell (or Command Prompt).
Step 2. Type ipconfig and hit Enter, then the information will be displayed in the window.
Manually Change IP Address

Step 1. Click Start menu, then type Control Panel and click the option on the result.

Step 2. Open Network and Internet > Network and Sharing Center .

Step 3. On the left pane of the new window, click Change adapter settings .

Step 4. You will be displayed with
Network Connections
of the PC.
Important note : Right click on “Ethernet” or “Local Area Connection” if you want to
change IP of any physical connection. And right click on “WLAN” in case you wish to
change IP of any wireless connections.

Step 5. Choose Properties after right clicking on the network name.

Step 6. Select the
Internet Protocol Version 4 (TCP/IPv4)
, then click
Properties
.