© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197
|
|
www.rgblink.com
20 / 46
Output| Input|Overview
Output Setting
1. Click any output port, the board where the port locates is selected. Users can do settings to the port now.
A red rectangle flashes around the chosen port when it is clicked.
After DVI port is selected, users can do the following settings in the edit section after clicking icon
,
Resolution setting, Test Pattern, DE Setting, Property Setting.
After DP, HDMI or SDI is selected, reslution setting and DE setting can be done.
After HBbaseT is selected, resolution setting, Test pattern and OSD setting can be done.
2.1.1
Resolution Setting
Output Switch: Slide On or OFF
Format Rage: Slide to select ALL or Module. (For output modules on Flexpro, there is no difference between
selecting All or Module as there is only one port on each each module)
Format Type:Standard or Customize.
There are 32 standard (normal) resolution types available, the highest is 2560x816@60.
If Customize is chosen, users can put in desired resolution (Width, Height, Refresh Rate) based on field
application.
