FLEX4ML
User Manual
14
Width
1920
Height
1080
H POS
0
V POS
0
Save
Reset
Output Resolution
>>
Split Mode
>>
Multi-Split
>>
L1~L4 Souce
：
After layout is selected, input source has be to be selected for each layer.
Input 1~4 is optional source, if there is no module installed, it will show :Index.NO BOARD
Input 5~8 is DUAL DVI
，
6.HDMI 1.4, 7.HDMI 2.0
，
8.DP 1.2 which locate on standard 4K@60 digital
module.
Layer Adjustment
：
After layout selection,Width, Height, Horizontal Position, Vertical Position of each
layer shall be set.
Crop
：
crop the source width and height for each layer.
Save Setting
：
After layer adjustment and source crop is done, Save Setting to confirm the setting.
Reset Parameter
：
Cancel the above setting.
3.3.2 Split
Push MENU, rotate the knob and select <Split>
Output Resolution: the same as Output Resolution in Presentation Mode.
