DXPH0404
User Manual
17
Media Type
This function can be setup MATRIX host intranet
“
Media Type, press the ENTER, the second row will flash,
then press the UP or DOWN button to select 10M, 100M, AUTO, press ENTER to complete the setting.
Media Type
100M
Media Type default:100M
MAC Filter
MAC Filter can be setup with registered MAC Address in order to connect the MATRIX host Web UI, MAC
Address required by the Web page to fill in, this function can only be setup at
“
DISABLE
”
,
“
ENABLE
”
, then to
press the ENTER, the second row will flash, then press the UP or DOWN to select DISABLE, ENABLE, then
press ENTER to complete the setting.
MAC FILTER
DISABLE
MAC Filter
default: Disable
3.3.5 REMOTE ID
This function must be set to match the Matrix remote control IR01 with the matrix itself. A conflict with other
devices remote control is avoided.
After entering REMOTE ID menu, press ENTER, the LCM LINE 1 number will flash.
Then Press UP or DOWN
button to select the number, and then press ENTER to confirm.
When finish REMOTE ID setting, MATRIX remote control IR01 must also set the same ID
in order to operation in normal.
IR Remote setting: Press and hold the POWER button, then press the number button which can be set from 0 to 9,
total 10 groups.
These settings on IR01 remote control have to be done the first time you use the IR01 or when you change the
batteries.