Address
:
S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925771202
Email: [email protected] http://www.rgblink.cn
7
How to Switch between Input and Output Channel
User can switch the signals between input and output channel by front panel buttons of
DXP D0808, specific operations are as follows:
1. If choose “AUTO TAKE ON”, push any button on output area on the front panel, for example,
choose [5] as the output channel.
Then push any button on Input area on the front panel, for example, choose [3] as the input
channel, the signal of output channel 5 will be switched to the signal of input 3.
2. If choo
se “AUTO TAKE OFF”, push any button on output area on the front panel, for
example, choose [5] as the output channel.
Then push any button on input area on the front panel, for example, choose [3] as the input
Channel. After setting, push the [TAKE] button to confirm.
Note:
Input channel: The signal that will be switched to output channel.
Output channel: The signal that connected to display device.
The number [1]~[8] means channel 1~8.
How to Switch One Input to all Outputs
1. If choose “AUTO TAKE ON”, push the [ALL] button on the front panel.
Then push any button on input area on the front panel, for example, choose [3] as the input
channel, all the signal of output channel will be switched to the signal of input 3.
2. If choose “AUTO TAKE OFF”, push the [ALL] button on the front panel.
Then push any button on Input area in the front panel, for example, choose [3] as the input channel.
Push the [TAKE] button to confirm, all the signal of output channel will be switched to the signal
of input 3.