RGBlink 710-1008-01-0, User Manual

Page: 24 / 69

Felxpro 8 User Manual 23
Output Setting
1. Click any output port, the board where the port locates is selected. Users can do settings to
the port now.
A red rectangle flashes around the chosen port when it is clicked.
2.1 After 2K DVI or HDMI port is selected, users can do the following settings in the edit section
after clicking icon , Resolution setting, Test Pattern, DE Setting, OSD Setting.
2.1.1 Resolution Setting
Output Switch: Slide On or OFF
Format Rage: Slide to select ALL or Module. (For output modules on Flexpro, there is no
difference between selecting All or Module as there is only one port on each each module)
Format Type:Standard or Customize.