
ASK
User Manual
10
Transmitter Installation
1. Connect the ASK TX’s HDMI and USB jacks to the laptop USB/HDMI inputs.
2. The LED indicator of the ASK TX will light on in green when it’s booting up.
3. The LED indicator become purple and flashing when ASK is ready to stream.
4. Touch the finger print to start presenting and the LED indicator become stastic Purple,
meaning the casting is successful.
Pairing of TX and RX
On delivery, each ASK set has been paired , but when extra TX are required, following steps are
the method for users to finish TX/RX pairing.
a. connect HDMI cable on TX to HDMI port on RX
b. connect USB cable on TX to USB-A port on RX
c. wait till the LED indicator light up in purple indicating pairing successful.