DTR_319-01-01-001_EN_b
3
1.
Specifications
Dimensions (WxHxD)
168mm x 192mm x 86mm / 6.6in x 7.6in x 3.4in
Light field diameter:
70mm / 2.8in
Acceptable input voltage range (long-term):
100 ÷ 240 VAC
Acceptable input voltage range (short-term):
85 ÷ 264 VAC
Acceptable input voltage frequency range:
47 ÷ 63 Hz
Operating temperature (ambient):
-25°C ÷ 45°C / -13°F ÷ 113°F
Operating temperature (device surface):
-25°C ÷ 70°C / -13°F ÷ 158°F
Average power consumption:
5W
Ingress protection rating
1
IP:
65
Weight:
1.5kg / 3.3lbs
2.
Transport and storage
The device is sensitive to mechanical damages. Care should be taken to properly protect the device during
transport so as to eliminate any damage. It is forbidden to transport the device components separately in a
collective package – each component must be packed separately and cannot 'bump' during transportation.
Due to protective packaging, the device should be stored in the temperature -25°C ÷ +60°C [-13°F ÷ 140°F]
at the humidity below 99%RH.
3.
Device construction
TL-70-2- is cased in a powder-coated steel housing. The properly installed device meets the IP65 tightness
requirements.
3.1
TL-70-2 construction
The figure shows the TL-70-2 light signalling device
2
.
det. A
-roof;
det. B
- controller;
det. C -
back cover;
det. D
- roof fixing screw;
det.
E
- light field;
det. F
- device front;
det. G -
LED module;
det. H
- back cover fixing screws;
Fig. 1
3.1.1
List of the signalling device cables
1
Five-metre power lead (3 x 1mm² [17AWG], core markings: blue, brown, yellow-and-green), terminated
with WAGO connectors on each core.
2
Five-metre signal cable (3 x 0.25mm² [24AWG], core markings: black - GND, red - red button/switching on
red light, orange - green button/switching on green light), terminated with WAGO connectors on each
core.
1
Ingress protection rating defined according to the EN 60529 standard.
2
Explanatory figure
