6
DTR_106-01-02-001_EN_b
5.2.1
List of the signalling device connections to the RGB devices
1. The relay cable coming out of the RGB Technology device should be connected as follows:
Blue core -> RA connector of the relay;
Brown core -> RB connector of the relay;
6.
Initial start-up
Step 1: Make sure that all the leads are properly connected,
Step 2: Make sure that all the components have been installed in the correct orientation (the horn and the
leads facing down),
Step 3: Connect the RGB Technology device and the industrial acoustic signalling device of 108 dB to the mains
power supply,
Step 4: The properly connected system should start signalling the programmed alarms, events.
7.
Disposal and recycling
7.1
Packaging material recycling
The packaging elements must be segregated and, then, recycled in accordance with the local executive
regulations on waste disposal.
7.2
Device disposal
The device must not be disposed of as urban waste!
In accordance with the directive 2002/96/EC (WEEE), if the repair of the device is not economically justified, the
user must take the damaged or destroyed equipment to a special waste disposal centre.
8.
Most common installation errors
1
Wrong orientation of the signalling device.
2
Drilling additional mounting holes.
