RGB Spectrum HDR 205HD, User Manual

Page: 11 / 15

R E M O T E C O N T R O L
Connecting the Optional RS-232 Port
8 HDR 205HD User Manual August 7, 2001
4
TABLE 1.
RS-232 Serial Port Pinout
R S - 2 3 2
.
. . . . . . . . . . . . .
P A R A M E T E R S
Ensure that your device is set up with these default serial port parameters.
TABLE 2.
RS-232 Serial Port Parameters
.
. . . . . . . . . . . . .
N U L L M O D E M You may need to connect the HDR 205HD’s serial port adapter to a host
computer configured as Data Communications Equipment. This is done using a
null modem. The net effect of a null modem is to reverse the Transmitted Data
and Received Data connections. Also, the Request to Send and Clear to Send
connections are reversed. This is done by using a special “null modem” cable,
or by inserting a small “null modem” box or cable in series with a regular
“straight through” cable.
9-pin D-Sub Description
1 (not connected)
2 Received Data
3 Transmitted Data
4 Data Terminal Ready
5 Ground
6 Data Set Ready
7 Request to Send
8 Clear to Send
9 (not connected)
Duplex Full
Baud rate 9600 (or as required)
Data bits 8
Start bit 1
Stop bit 1
Parity no parity
Physical 9-pin D-Sub connector (female)
Configuration D.C.E.
Handshake X-On / X-Off