User Manual for XS2500
R
G
B
LASER VERKOOP
Lierderholthuisweg 27
8144 RG Lierderholthuis
The Netherlands / Holland
- 4 -
This product accepts digital control
signals in protocol DMX512(1990).The amount of lighting fixtures connected in parallel is
no more than 32.Connect the DMX controller's Output to the first lighting fixture's Input cable
with a 2 core XLR signal cable(Shown as above ),connect the first lighting fixture's Output cable to the
second lighting fixture's Input cable and connect the rest light fixtures in the
same way.Eventually,connect the last lighting fixture's Output cable to a DMX terminator
Under DMX-512 signal control mode,the last lighting fixture's DMX Output must be connected with
a DMX terminator.This prevents electrical noise from disturbing and corrupting the DMX control
signals.The DMX terminator is simply an XLR connector with a 120(ohm ) resistor connected
across pins 2 and 3,which is then plugged into the output socket on the last projector in
the chain.Then connections are illustrated above.
Note:
Please do not connect the signal cable OUT and IN in other way except above shown.
4. SD card laser operating system
Operating Buttons
：
Mode Up Down Enter
MODE
：
Change modes
UP
、
DOWN
：
When it is at PRG and ILD mode, just change files. When it is at sound mode, just
change the rhythm.
Press and hold the Enter key for more than 3 seconds to save the current mode.
Working Mode
：
Prg Mode
：
Play PRG FILES. The second line displays the playing list name. Press“UP”and“DOWN”to
change playing list.
ILDA Mode
：
Play ILDA FILES one by one.(Format is ILD
）
，
The second line displays the playing list
name of ILDA Files
，
Press“UP”and“DOWN”to change playing list.
Audio Mode
：
Play programs according to the music. Press“UP”and“DOWN”to change the rhythms.
Auto Mode
：
Play programs automatically
。
Dmx Mode
：
The first line shows the DMX IP, the second show the receiving status of the controller.
DMX Channel Details
：
