background image

 

User Manual for XS1500     

                                                                                 

R

G

B

 

LASER VERKOOP 

Lierderholthuisweg 27

 

8144 RG Lierderholthuis 
The Netherlands / Holland

 

- 6 -

 

                     

 

 

 

    This  product  accepts    digital  control  signals  in  protocol  DMX512(1990).The  amount    of   

lighting    fixtures    connected    in    parallel    is    no    more    than    32.Connect    the  DMX 

controller's  Output  to  the  first  lighting  fixture's  Input  cable  with  a  2  core  XLR  signal  cable(Shown  as 

above ),connect the first lighting fixture's Output cable to the second    lighting    fixture's    Input    cable 

  and    connect    the    rest    light    fixtures    in    the    same  way.Eventually,connect  the  last  lighting 

fixture's Output cable to a DMX terminator   

 

Under DMX-512 signal control mode,the last lighting fixture's DMX Output must be connected with a 

DMX  terminator.This  prevents  electrical  noise  from  disturbing  and  corrupting    the  DMX  control 

signals.The  DMX  terminator  is  simply  an  XLR  connector    with  a  120(ohm  )    resistor    connected   

across    pins    2    and    3,which    is    then plugged into the output socket on the last projector in the 

chain.Then connections are illustrated above.   

             

 

 

 

    ILDA control signal connection method:   

 

Connection built through product male/female DB 25 degree socket.Like    above   

picture. In addition to the above connections, ILDA signal cannot be connected in any other way.   

         

                                                         

     

  ILDA control mode 

 

    Connect  ILDA  signal,the  lighting  fixtures  will  automatically  switchover    to    ILDA         

working  mode.This  lighting  fixtures'  ILDA  signal  cable 

connection  way  is  compliant  to 

international          standard.

   

        DMX Channel Chart : 

 

Summary of Contents for XS1500









Reviews: