www.rcavioni.com 065/33-99-363 [email protected]
www.rcavioni.com 065/33-99-363 [email protected]
-Flight setup-
Center of gravity: 2” 3/4 to 3” 1/4 from leading edge. 3" is a good place to start.
Control throws for 3d setup: Ailerons=35 degrees. Elevator = 45 degrees. Rudder = 35-45 degrees.
Exponential settings: 75 % Ailerons, 75% Elevator, 75% Rudder (subject to the pilot’s likes and feel)
*Control hinges can be tight for the first couple flights, they are design to wear in and become more flexible in time.
We suggest you check movement on all control surfaces after a few flights. Any tearing or damage to the
airframe/hinges can be fixed with Welder Adhesive
*
Storage of this EPP planes should be hung from its prop and let airframe hang, doing otherwise can cause airframe
twisting. Also these planes shouldn’t be stored in a hot car which can also damage airframe.*
Slick airframe only:
SFG’s installation is optional. SFG’s add stability in harriers also give more rudder
authority.
Glue both SFG’s to the end of wing as shown.
Top of wing view Bottom of wing view
Make sure there is a gap between the aileron flap and SFG’s,
do not
glue them together!
