background image

Contents 

 

Warnings------------------------------------------------------------------------------------

P1

 

Contents-------------------------------------------------------------------------------------

P2

 

A. Description----------------------------------------------------------------------------------------------

P2

 

1) Transmitters -------------------------------------------------------------------------

P2

 

2) Firing Module ------------------------------------------------------------------------

P3

 

B. How the system works in Two Different Firing Modes-------------------------------

P3

 

1) Use Transmitter A for Dividual Firing mode---------------------------------------

P3

 

2) Use Transmitter B for Interval Firing Mode----------------------------------------

P3

 

C. Before Attaching E-matches/Igniters--------------------------------------------------

P3

 

1) Installing or Connecting Batteries--------------------------------------------------

P3

 

2) Safety Tests --------------------------------------------------------------------------

P4

 

D. Some Available Functions---------------------------------------------------------------

P4

 

Learn Codes / Clear Codes -------------------------------------------------------------

P4

 

Test---------------------------------------------------------------------------------------

P4

 

Arm---------------------------------------------------------------------------------------

P5

 

Low Power Alarm------------------------------------------------------------------------

P5 

Digital Readout Meter-------------------------------------------------------------------

P5 

   
 

 A. Description

 

 

Firing Module FCC & CE 
certified. 

 

OOK (ASK) Wireless 
Radio, 433.92MHz.   

 

12 cues. 

 

Overload Protection. 

 

Reverse Protection. 

 

Learning Code, with more than one million address code 
combinations. 

 

Two Firing Modes: Instant Firing and Firing In-Sequence.   

 

Output Component: MOSFet 

 

Dual powered: Either 6x AA internal batteries or external 
power 6V to 20V DC

. The

 Maximum firing current is 10A. 

 

Range 100-2000m. 

 

Working temperature: From -10

 to +5

0℃

 

1)

 

Transmitters: 

Transmitter A: Dividual Firing Transmitter. Buttons have 1, 
2… 12. Each button fires its corresponding cue of the 
firing module. 
Transmitter B: Interval Firing Transmitter, Buttons have 0.1, 0.2 … 0.9, 1.0, 2.0, ALL. Fires 12 cues of 
the firing module at 0.1s, 0.2s, 0.3s, … etc. separately. 

Summary of Contents for MS12Q







Reviews: