LED Rear light TOUR HPP
Introduction
These operating instructions form part of the product. They contain important safety,
installation and disposal instructions. Please read the operating and safety instruc-
tions carefully before using the product. Use the product only as described and only for
the indicated range of application. When passing the product on to another person,
make sure to hand over all documentation together with the product.
Intended use
The product is intended to be used on bicycles to illuminate the ground around the
bicycle. The light emission must not be impaired by bicycle parts or baggage. The
product is intended to be used outside. You must not use the product in any other way
than intended and must not modify or change the product in order to prevent damages
on the product and/or injuries. The manufacturer does not assume liability for any loss
caused by improper use of the product. The product is not intended to be used for
commercial or industrial applications.
Package contents
1 LED rear light incl. 2x AAA batteries, operating instructions
Specifications
Type:
TOUR CMPT (rear light)
Battery:
2x AAA batteries 1.5 V or 2x AAA rechargeable batteries 1.2 V
Functions:
Steady mode
Battery Indicator:
1x red
Light ON time:
ca. 92h
Safety note
DANGER! CHOKING AND ACCIDENT HAZARDS TO INFANTS AND CHILDREN!
Never leave your child unattended with the packaging material. There is a danger of
suffocation due to choking on swallowed packaging. Children are often not aware of the
zhazards. Keep the product out of reach of children at any time. The product is not a toy!
The product is not intended for use by persons (including children) with limited or
inhibited physical, sensory or mental capability or lack of experience or knowledge,
unless they are supervised by a person responsible for their safety. Please note that
damages caused by improper use and noncompliance with the operating instructions
or by repairs or manipulation carried out by unauthorised persons are excluded from
warranty. Do not disassemble the product at any time. Repairs carried out by
unouthorised persons can cause significant danger to the user. Any repairs must be
carried out by qualified personal. The LEDs are non-replaceable.
Safety notes relating to batteries:
Keep batteries out of reach of children, do not throw batteries into fire and do not
short-circuit or dissemble batteries. Ensure correct polarity when inserting the
batteries. If necessary, clean the contacts on batteries and/or devices before inserting
the batteries. Remove empty batteries immediately from the device to prevent battery
leakage. Do not expose batteries to excessive heat, e.g. through sunlight, to fire or
similar to prevent battery leakage. Non-compliance with these instructions can lead to
batteries being discharged below their cut-off voltage and leaking. Remove batteries
immediately to prevent damages. Avoid contact with skin, eyes and mucous membra-
nes. Rinse any spots that have been in contact with battery acid immediately with plenty
of clear water and seek medical attention. Always replace all batteries at the same
time. Use only batteries of the same type. Do not use batteries of different types or
used and unused batteries together. Ensure the device is switched off after use.
Remove batteries from the device when you do not use the device over longer periods
of time.
Notes relating to battery disposal:
You can dispose of weak and empty batteries free of cost at designated battery collecti-
on points in battery-selling shops or at local recycling centres. Consumers are legally
obliged to dispose of batteries at these collection points and centres.
Batteries must not be disposed of with household waste.
Batteries containing harmful substances are also marked with the chemical symbol for
the substance: -Pb- lead -Hg- mercury -Cd- cadmium
Improper disposal of batteries wastes valuable resources and harmful substances
from batteries can pose significant hazards to people´s health and to the environment.
Separate collection / disposal of used batteries helps to prevent health and environ-
mental hazards and to recover valuable raw materials through recycling.
Notes relating to the disposal of devices and packaging:
You can dispose of the packaging at local recycling centres. (Please refer to your local
authority for details.) The packaging is made of environmentally friendly materials. If
you no longer use the product, do not throw it into the household waste but dispose of
it properly as arranged for by your local authority. Please refer to your local authority
for further details.
Fitting the light
Fit the light as shown in image in direction of travel. The rear light must be firmly
connected to the bicycle and the light distribution must not be obscured. It must be
adjusted so as not to blind other road users. Mounting height of the rear light:
min. 400 mm and max. 1200 mm above the roadway.
Operating the light
Press the button to switch the light on and off.
Inserting the batteries
Insert the batteries as shown in image.
Cleaning the light
Clean the light with a damp, lint-free rag.
Never put the light into or under water. Do not use corrosive or abrasive cleaners. They
can damage the light.
NOTE!
When the illuminated battery indicator on the rear light indicates red, the batteries
need to be replaced. Check the tight fit of the light before every ride and check the
silicone strap for suitability and visible defects (such as cracks).
If the battery is completely empty, the light will switch off. Before every ride use the
battery indicator to check that the battery is sufficiently charged.
WARNING!
Never recharge the supplied batteries. They are not rechargeable. Danger of explosion!
Version 1.1
EN
Adjustable angle
Battery case
2x AAA batteries
Silicone
strap
ON/OFF Button
Battery indicator (red)
Battery change
2x AAA batteries
installation axis parallel to
the ground and parallel to the
vehicle‘s longitudinal axis