HN-2010
This script file sets the baud rate of the PC COM that WinCOM is using to 115,200
kbps, de-asserts DTR, waits 200 milliseconds, asserts DTR, waits 200 milliseconds,
sends the configuration mode escape sequence, waits 200 milliseconds and then sends
the m! command to the radio. What this script file does is set the PC COM port baud
rate to 115.2 kbps, puts the radio in config mode and the issues the command to
display all of the radio parameters that have been changed from factory default. Note
that this script file leaves the radio in config mode. Cycling power or toggling DTR
will return the radio to data mode.
WinCOM prompts you to select the desired .wcr file. Opening the script file causes it
to executed immediately.
The seventh tool allows the loading of a data file for transmission. Navigate to a file
then click Open and the file is transmitted immediately.
The Capture File dialog displays with a bar showing loading progression. Once the
file has finished transmitting, the Final Average Throughput and Bytes sent numbers
will be displayed.
©
2000- 2004 Cirronet
™
Inc
23
M-2410-0011 Rev B
Summary of Contents for HN-2010
Page 1: ...HN 2010 Repeater User s Guide ...
Page 6: ......
