RF 812G Instruction Manual Download Page 2

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

WARNING

!

!

 

 

Some dust created by power sanding, sawing, 

              grinding, drilling, and other construction activities 
              contains chemicals known to the State of California to 
                            cause cancer, birth defects or other reprodrctive harm. 
                            Some examples of these chemical are: 
 
                           

Lead from lead-based paints. 

                           

Crystalline silica from bricks, cement and other 

                masonry products. 
                           

Arsenic and chromium from chemically-treated 

                                lumber. 
                             
 
                            Your risk from these exposures varies, depending on 
                            how often you do this type of    work. To reduce your 
              exposure to these chemicals: Work in a well ventilated 
                            area, and word with approved safety equipment, such 
                            as those dust masks that are specially designed to 
              filter out microscopic particles. 

 

Summary of Contents for 812G
































Reviews: