REMC26G40GF
RF-LAMBDA USA LLC:
www.rflambda.com
Sales:
Technical:
Rev 1. 07-18-2022. | Subject to change without notice
Parameter
Rating
Supply Voltage Range
110VAC to 240VAC
*RF Input Power (RFIN)
Psat – Large Signal Gain
*Maximum RF input power is set to assure safety of amplifier. Input power may be increased at own risk to achieve full power of amplifier. Please
reference gain and power curves.
**For vibration testing details please see additional information section.
Absolute Maximum Ratings
Environmental Specifications and Test Standards
Parameter
Description
Operational Temperature
0
⁰C
to +50
⁰C
(Ambient Temperature)
Storage Temperature
-40
⁰C
to +85
⁰C
Thermal Shock
-30
⁰C
+70
⁰C
(5 Cycles / 10 hours)
**Random Vibration
MIL-STD-202G
Table 214-I, Test Condition Letter C
1.5 Hours Per Axis
High Temperature Burn In
Tempe50
⁰C
for 72 Hours
Shock
1. Weight >20g, 50g half sine wave for 11ms, Speed variation 3.44m/s
2. Weight <=20g, 100g Half sine wave for 6ms, Speed variation 3.75m/s
3. Total 18 times (6 directions, 3 repetitions per direction).
Altitude
Standard: 30,000 Ft (Epoxy Sealed Controlled Environment)
Optional: Hermetically Sealed (60,000 ft. 1.0 PSI min)
Hermetically Sealed
(Optional)
MIL-STD-883 (For Hermetically Sealed Units)
1. Connect input and output with 50 Ohm source/load.
(In band VSWR < 1.9:1 or >10dB return loss.)
2. Connect Power Cable
3. Turn On Back Panel AC Power Supply Switch
4. Press Front Panel Power Switch to Power Display
Bias Up Procedure
Bias Down Procedure
1. Press Front Panel Power Switch to Power Off Display
2. Turn Off Back Panel AC Power Supply Switch
3. Remove Power Cable (If Moving Equipment)
4. Disconnect input and output with 50 Ohm source/load. (In
band VSWR < 1.9:1 or >10dB return loss.)
