RF Innovations CRESCENDO VHF HALF-DUPLEX, User Manual, Page: 62 / 74

Appendix B Management Reference
Crescendo VHF Half-Duplex User Manual Page 62 of 74
B.5 Diagnostics
Diagnostics Page AT
Fault The last fault that was reported.
I15
Startup Reason
Indicates if the radio started normally or due to
a watchdog reset.
EEPROM Status The state of the EEPROM at start-up.
R10
Build Date The date that the firmware was built.
R9
Monitor RSSI
Puts the radio in a mode when it continuously
outputs the RSSI on the current channel (can
only be used in menu).
Factory Reset Resets all settings to factory defaults. 68
&F1
Load Configuration
Reloads all configuration from EEPROM,
discarding changes made with AT commands.
62
Z
Save Configuration
Saves all configuration changes made with AT
commands to EEPROM.
62
&W
Data Driven MAC
Performance statistics when using the data
driven serial protocol
19
Packet Driven MAC
Performance statistics when using a serial
protocol other than the data driven protocol.
19
Baseband Statistics Baseband specific statistics. 19
Reset Data Driven Statistics Clears all Data Driven MAC statistics
Reset Packet Driven Statistics Clears all Packet Driven MAC statistics
Reset Baseband Statistics Clears all baseband statistics.
&C1
Event Log
Level The logging level.
S60
Clear Event Log Clears the event log
Table 28: Diagnostics