Appendix C Hayes References
Crescendo VHF Half-Duplex User Manual
Page 65 of 74
ATI25[s]
Get Baseband Statistic
ATI26[s]
Get Data Driven MAC
Statistic
ATI27[s]
Get Packet Driven MAC
Statistic
ATI50
Channel Width
Table 31: Hayes I-register commands
C.4 S-Registers
All serial port configuration and status commands can be executed on either the main port or auxiliary port.
The parameter
[p]
that may be passed to each serial port AT command should be set to
0
for main, or
1
for
auxiliary.
Command
Name
Notes
ATS0
Rings Before Answer
Sets or returns the current number of rings before
auto-answer.
ATS1
Auto Answer
0: Disabled
1: Enabled
ATS2
Escape Character
Sets or returns the current escape character.
ATS7
Wait for Carrier
Sets or returns the number of seconds to wait for a
carrier to be established.
ATS12
Escape Guard Time
Sets or returns the escape guard time in ms.
ATS38
Broadcast
Retransmissions
ATS39
Tx Packetiser Timer
ATS40
Rx Packetiser Timer
ATS41
Singlecast Retries
ATS45
Transmit Power
0: 0 dBm
1: +20 dBm
2: +27 dBm
3: +30 dBm
4: +36 dBm
5: +37 dBm
ATS50
Network Address
ATS51
Radio Address