background image

Install the Top Cover using screws 2.9×25mm and screws 2.9×12mm. 

Mind the correct positioning of the Screws as shown on picture!  

Cut or chip away premolded parts of the front panel, if interfering with 

RouterBoard´s connectors.

3  Installation of the Seal and Light Guides

A  Install the Silicone Seal in StationBox´s Body. 

B  According to the specific RouterBoard setup, install the Light Guides 

to support readability of RouterBoard LEDs.

Instruction Manual 

StationBox® S

5  How to Mount, Remove and Protect the StationBox® S

RF elements Accessories

4  Install the Top Cover

You can easily snap StationBox® S to compatible Antenna. Please 

refer to our webpage 

www.rfelements.com

 to check updated list of 

compatible antennas. 

To remove StationBox® S from the mount, use tool to release the 

mount´s lock. Any firm object that fits the gap could be used: 

screwdriver, wrench, knife etc.

For installation on the Wall or Pole, use RF elements EasyBracket™ S,  

bracket compatible with StationBox® S and StationBox® Mikro.

2× Screws #7

2× Screws #8

RouterBoard is Trademark of MikroTik,  Aizkraukles iela 23, Riga, LV-1006 LATVIA

www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299

Reviews: