INSTALLATION—CONTINUED
Venting Connections—Continued
Venting Requirements
•
These power-vented heaters are designed to operate safely and efficiently with either a horizontal or vertical vent .
Comply with the specific requirements and instructions .
•
Installation should be done by a qualified agency in accordance with these instructions . The qualified service
agency installing this system is responsible for the installation .
•
Venting must be in accordance with local codes and with the National Fuel Gas Code Z223 .1 . Local requirements
supersede national requirements .
•
Model LDAP heaters are certified as Category III heaters . Refer to
for a list of Category III vent manufacturers .
18
LDAP-IOM (01-22) 207733-A
Table 9. Category III Vent Manufacturers
Manufacturer
Model(s)
Diameter
(Inches)
CaptiveAire Systems
2V-Type BH
—
Cheminee Lining E Inc .
IPP, HEP, HEPL, HEPLA, HEPL1, and HEPL2
6–48
Cleaver-Brooks Inc .
CBH, CBHL, CBHL2, CBHLA, and CBHL1
DuraVent Inc .
FasNSeal fixed blade damper assembly
4–18 (ID)
FasNseal special gas vent assembly
—
FasNSeal W2 special gas vent system
FasNSmooth chimney liner system for use in masonry chimneys only
FasNSeal CVS special gas vent system and direct vented pellet system
S-Vent and PVP
4 and 5
ENERVEX Inc .
EPS and EPS-1
4–48
ECCO Manufacturing Division of
ECCO Heating Products Ltd .
SGDW series
3–6
ICC Industrial Chimney Co .
VIC
4–24
Industrial Combustion LLC
ICH, ICHL, ICHLA, ICHL1, and ICHL2
4–48
Jeremias Inc .
DWKL, SWKL, DWFL, and SWFL
4–36
DWGV double-wall, air-insulated, 1 inch between inner and outer pipe diameter
—
DWGV1 double-wall, fiber-insulated, 1 inch between inner and outer pipe diameter
DWGV2 double-wall, fiber-insulated, 2 inches between inner and outer pipe diameter
SWGV single-wall
4–12
Lifetime Chimney Supply LLC
Xi1, Xi2, and Xi4
5
METAL-FAB Inc .
CGSW, FCSSW, CG, FCS, FCG-1, and FCS-1
6–24 (ID)
FCGSW, FCG, FCG-1, FCS-3 CORR/GUARD, and FCS-2 CORR/GUARD
6–36 (ID)
CGSW, CG, FCG, 3CGSWHVK, and 4CGSWHVK
4 and 5
Noritz America Corporation
N-Vent
4 and 5
Rheem Sales Co . Inc .
RTG
3
Security Chimneys International Ltd .
Secure Seal Flex chimney lining system
3–12
Selkirk Corporation
Saf-T-CI and Saf-T C1
4, 5, and 6
Saf-T-Vent
3–6 and 8
EZ Seal
3–6
SGV
3, 4, and 5
CI Plus
6 and 8
SC, DGV, EZ Seal Quick Kit, Sel-Vent, and Sel-Vent II
4
IPS316, PS316, and G316
5 and 6
SFL Flue & Chimney
DEVON EPS and EPS-1
4–6
The Schebler Co .
SSD, ESW, eVent, and eVent PLUS
2 and 4–6
eVent SD
4–6
Sunair Products
SADW-2V and SADW-V
4
Tokyo Gas Renovation Co . Ltd .
KP and KC
4 and 5
N-Vent
3, 4, and 5
VAN-PACKER CO INC
MW, CS, and CSplus
4–6 (ID)
Z-FLEX US INC
SVE and SVEII
3 and 4
SVEIII
2, 3, and 4
SVEIV single-wall and SVEIV double-wall
4, 5, and 6
NovaVent single-wall and NovaVent double-wall
Z-VentBlu single-wall and Z-VentBlu double-wall
3, 4, and 5