0503RHC8RJLGBEN
12/34
3.6 C
OMBUSTION AIR SUPPLY
&
FLUE SYSTEM
Inlets for combustion air and flue outlets shall be so
designed so that when an appliance is finally
installed their termination shall be at least 500mm
above deck/ground level.
The heating modules are delivered with all parts
necessary for the construction of the jacket so that
combustion can take place safely and in line with the
Gas Appliance Directive.
Figure 6. : General arrangement combustion air inlet and flue products outlet for RHC 8000(M) RJL units
Combustion air inlet protection grill
Type PN
Type PN
8125M
90 79344 10
8075 15
90 79344 10
8150M
90 79344 14
8090 18
90 79344 10
8175M 90
79344
12
8200M 90
79344
08
All others
90 79050 (1)
(1) No restriction on air inlet
90° bend with seal
ring (PN 60 50733
100 or 60 50733 130)
Flue extension, if required
∅
100 or
∅
130 (not
supplied)
Control compartment panel
(not supplied)
Teflon sealing ring
∅
100 or
∅
130 (PN
06 22786 104 or 06 22788 134)
Gas passage grommet vinyl RC ¾” or RC 1 ¼ » (PN 06
22783 125 or 06 22783 054)
Combustion air inlet protection grill (see data below for the appropriate PN’s)
Alu terminal
∅
100,
L=300 (PN 60 50712
300) or
∅
130 L=282
(PN 60 50712 130282)
(n° 59008_01)
