SOHOTower
Cable Managemenet
Manage the KVM cable sets by tying all the cables with the
attached Velcro and run the Velcro through the loop at the
back of the
SOHO
Tower
. The Velcro can support the
weight of the cable sets to prevent the
SOHO
Tower
from
tumbling, as shown in Figure 4.
Figure 4: Velcro ties the cable sets and extends the base of
the
SOHO
Tower.
Initial Power-up
Make sure all computers and the SOHOTower are
powered down during installation. You may power up
the computers after installation,. The SOHOTower can
be powered from the computers. This procedure
ensures the SOHOTower receive computer settings
correctly when computer boots.
NOTE:
You may hot plug any additional powered-down
computer to the
SOHO
Tower at any time after the initial
power up.
6
Summary of Contents for SOHO Tower TNP12C
Page 1: ......