21
3. Host Selection
After successfully connecting all of NXMU LAN extenders, you can choose one receiver
(For Example, Local IP: 169.254.5.185) to play a source from Senders. When you push
F1 on the receiver, you will see one message box in the frame. Node List records four
digits (meant Sender’s ID) that you set it before, and you can choose one to enter.
(You
can check the form for reference below)
Once entering this Host Selection Window, we suggest you making system renew
Node List by clicking “Refresh” button.
After finishing operation between sender and receiver(s), you can push F1 on your
sender to disconnect other receivers.
Rotary
Switch
Four digits
Domain Name
0
0000
http://videolan-gateway0000.local
1 1000 http://videolan-gateway1000.local
2
0100
http://videolan-gateway0100.local
3 1100 http://videolan-gateway1100.local
4
0010
http://videolan-gateway0010.local
5 1010 http://videolan-gateway1010.local
6
0110
http://videolan-gateway0110.local
7 1110 http://videolan-gateway1110.local
8
0001
http://videolan-gateway0001.local
9 1001 http://videolan-gateway1001.local
A
0101
http://videolan-gateway0101.local
B 1101 http://videolan-gateway1101.local
C
0011
http://videolan-gateway0011.local
D 1011 http://videolan-gateway1011.local
E
0111
http://videolan-gateway0111.local
F 1111 http://videolan-gateway1111.local
Part 2: Multi-Cast (Multi-to-Multi) Configuration