AcroGear User Guide
8
=
For Laptop computer:
In most cases, all you need is one PS/2
male-to-male cable connected between the KVM switch and your
Notebook; the Y-adapter is not necessary. However, some Laptop
computers do not follow industry standard, please check your Laptop
user's manual for details.
Figure 5: Laptop PS/2 Port Connection
Now, you can turn on all devices and computers.
Note:
Do not connect both PS/2 and USB ports of
one
PC
port on the
KAG104 to a computer; otherwise, only the USB port is
effective at a time.
AcroGear User Guide
9
-----------------
Operations
Front Panel
<
On-line LED & Selected LED
When the LED turns green, the connected computer is powered-on.
When a computer is selected, its corresponding red LED illuminates.
<
Push-buttons
Each computer has a button associated with it on the front panel for
selection.
<
K/M RESET
K/M RESET
solves most problems developed by keyboard, mouse,
device replacement or change of configuration. Press down both the
front-panel number
1
and
2
push buttons for 2 seconds to re-configure
the whole system without turning either the USB KVM switch or any
computer off.
<
AUTO SCAN
Auto Scan
automatically scans through computers one by one in a
fixed interval (see
Scan Time
below). To initiate
Auto Scan
ning, for
KAG104 and KAG104D, you can press down both the front-panel
number
3
and
4
buttons for 2 seconds. For KAG108D and KAG116D,
press
7
and
8
instead.
Note:
For KAG104 model only: computers using USB keyboard and
mouse are not immediately operable when selected during Auto
Scan. Wait for about three seconds after switching to a USB
computer, and then use the keyboard and mouse.