As it is impossible to follow the continuing development of all materials (e.g.
lubricants in machine tools) which may interact with the controls and drives, it
cannot be completely ruled out that any reactions with the materials we use
might occur.
For this reason, before using the respective material a compatibility test has
to be carried out for new lubricants, cleaning agents etc. and our housings/
materials.
5.3.4
Motor Paint Coat
Color
Black (RAL9005)
Resistance
Resistant to
●
Diluted acids and lyes
●
Water, sea water, waste water
●
Common mineral oils
In restricted form resistant to
●
Organic solvents
●
Hydraulic oil
Nonresistant to
●
Concentrated acids/lyes
Additional paint coat
Allowed for:
Standard products
It is permitted to provide the housing with an additional paint coat having a
maximum thickness of 40 µm. Before applying the paint coat, verify the adhe‐
sion and resistance of the new coat.
When applying a paint coat subsequently, provide paint protection
on all safety labels, type plates and open plug-in connectors. The
functionality of the motor may not be restricted by the additional
paint coat.
Not allowed for:
Products for explosive atmospheres
It is not allowed to provide motors in Ex design with additional paint coats in
order to prevent negative effects on surface properties (such as insulation re‐
sistance, electrostatic charge).
5.4
Voltage Test and Insulation Resistance Test
According to standard, the components of the Rexroth IndraDrive range are
tested with voltage.
Test
Test rate
Voltage test
100% (EN 61800-5-1)
Insulation resistance test
100% (EN 60204-1)
Tab.5-10:
Applied Standards
Bosch Rexroth AG
DOK-INDRV*-SYSTEM*****-PR06-EN-P
Rexroth IndraDrive Drive Systems with HMV01/02 HMS01/02, HMD01, HCS02/03
64/309
General Data and Specifications
