REXROTH EFC 3610 Series, Operating Instructions Manual

Page: 389 / 422

H1: PROFIBUS card parameters
Code Name Setting range Default Min. Attri.
H1.00 PROFIBUS local address 0...126 1 1 Stop
H1.01 Present baud rate
0: None
1: 9.6 kbps
2: 19.2 kbps
3: 45.45 kbps
4: 93.75 kbps
5: 187.5 kbps
6: 500 kbps
7: 1,500 kbps
8: 3,000 kbps
9: 6,000 kbps
10: 12,000 kbps
– – Read
H1.02 Present telegram type
1: PPO1
2: PPO2
3: PPO3
4: PPO4
5: PPO5
6: PPO6
7: PPO7
8: PPO8
– – Read
H1.10 Output PZD 1
0: Not used
1: Control word
2: Frequency command
3: Torque command
1 – Stop
H1.11 Output PZD 2 2 – Stop
H1.12 Output PZD 3 0 – Stop
H1.13 Output PZD 4 0 – Stop
H1.14 Output PZD 5 0 – Stop
H1.15 Output PZD 6 0 – Stop
H1.16 Output PZD 7 0 – Stop
H1.17 Output PZD 8 0 – Stop
H1.18 Output PZD 9 0 – Stop
H1.19 Output PZD 10 0 – Stop
EFC x610 Series Bosch Rexroth AG
Appendix
DOK-RCON03-EFC-X610***-IT05-EN-P
357/389