2
9
2
8
Note:
If you do not use the parking mode function, please change
the Gravity Sensing sensitivity to low. Otherwise, the video
will easily be locked and the video cannot be deleted by the
loop recording function. This will cause the memory card to
be full of locked videos and cause the recorder to fail to
work normally.
Please DO NOT ENABLE the Parking Monitor function in
the settings of the dash cam WITHOUT connecting a
smart hardwire kit. They may cause a malfunction.
Option 2: Motion Detection
To use this feature, you need to connect it with a
Rexing
Intelligent Hardwire Kit (sold separately). Make sure that
the Parking Mode is turned off on your dash cam.
Make
sure that the Parking Mode is
turned off
on your dash
cam, otherwise it may cause a malfunction.
Once the sensor has detected MOTIONS. The intelligent
hardwire kit will power
up the dash cam automatically and
start recording until the MOTION is cleared.
ACC
This feature will allow the dash cam to switch to parking mode
automatically if the vehicle’s engine turns off and switch back
to the normal recording after the vehicle’s
engine turns on.
Gravity Sensing Record:
The Gravity Sensing detects significant or sudden movement
(such as an impact or collision), it will trigger an event
recording. We suggest setting the "Gravity Sensing" to High
sensitivity for Parking Mode Recording.
Please go to
https://www.rexingusa.com/
hwk-install/
to watch a video tutorial about
the installation or scan the QR
code on the right.
4.
4
Parking Monitor
(Parking Surveillance Mode)
Parking monitor provides surveillance on your parked vehicle.
When the engine is off, the hardwire kit is used to provide
continuous power and protect your car battery
from being discharged.
Option 1: Vibration Detection
To enable the Parking Monitor, you'll need to connect it with
a
Rexing
Smart Hardwire Kit (sold separately).
Battery
Ground
