Operating your R SERIES Dashboard Camera
Updating Firmware
33
@2017 REXING All Rights Reserved.
Updating Firmware
Stay up to date with your device’s latest firmware by visiting
firmware.rexingusa.com and following the steps below.
*Note: Not all Rexing Dash Cams have updated firmware available. If no
firmware is available for your device on firmware.rexingusa.com, you
already have the latest firmware installed.
The following procedure will allow you to use the Rexing website to update
firmware for your Rexing R1 Dashboard Camera:
1.
Download the firmware file to your computer
2.
Unzip the file
3.
Format your memory card in your computer (or unit)
4.
Copy the firmware files to the root of your memory card
5.
Put card into camera
6.
Power camera on (make sure the camera is plugged in)
7.
The camera will update automatically. The screen will stay off but the status
light will light up; it will take 30-60 seconds
8.
IMPORTANT - After updating, format the memory card using the format
function, otherwise the device will keep attempting to re-install the firmware
9.
Without disconnecting the power cord, hold the power button to reboot unit
