Rexing H2, User Manual

Page: 19 / 32

19
Wi-Fi Feature
Wi-Fi Feature
Step 1. Download the Trail Cam App from the
App Store;
Step 2. Change the camera to ON Mode;
Step 3. The screen will automatically enter the
Sleep Hunt Mode after 15 seconds (if the device
is in Sleep Hunt Mode already, please skip step
2 and 3);
Step 4. To turn on the Wi-Fi feature, press the
ON button on the remote control for 3 seconds.
The camera will automatically enter the Wi-Fi
mode after being turned on with the remote
control;
Step 5. To connect the Wi-Fi with your cell phone,
open the Trail Cam App and select Storage
Setting or Information Preview, the Wi-Fi Connect
window will be popped up automatically. Or go to
the Wi-Fi connect on your cell phone; find the Wi-
Fi Hotline named Trail Cam XYZ, and then enter
password 12345678 to connect with the Wi-Fi.
Step 6. After connected with the Hotline , go back
to the App interface and operate the functions
accordingly.
Step 7. Go back to the Main Menu after finishing
up the settings in the App. Click the Power Button
on the upper right corner or exit out the App.
Press the OFF Button for 3 seconds to make the
camera enter the Sleep Hunt Mode .
Note:
1. When connected with Wi-Fi, make
sure to keep the cell phone and the
camera as closer as possible. The
stronger and more stable the Wi-Fi
signal is, the faster the download
speed will be.
2. Once the App operation is
complete, exit out the App and
disconnect the Wi-Fi connection.
Turn off the camera with the remote
control to enter the Sleep Hunt
Mode for saving the battery life.
3. When the camera enter s the Wi-Fi
mode, if the cell phone did not
connect the Wi-Fi after 3 minutes,
the camera will automatically enter
the Sleep Hunt Mode .
4. When the Wi-Fi connected
successfully, if there is no signal
transferring between the H1 and the
cell phone after 3 minutes, the Wi-Fi
will be disconnected and enter the
Sleep Hunt Mode .