4
106.2
/CH
Product Installation
1.
Put the threaded knob on the end of the air vent bracket.
2.
Insert the set of air vent bracket into the round hole at the back of the main unit.
3.
Tighten the thread
4.
Open the air vent bracket and insert it into the car air-conditioning air vent grille,
tighten the screws to the best strength, adjust the angle of the FM transmitter,
and then use it.
Power ON/OFF
Turn on:
Insert the FMT2 into the cigarette lighter hole of the car. After the car is
started, the blue display will automatically turn on and flash once per second. If it
is off, long press the button for 3 seconds to turn on device.
Shutdown:
Cut off the power to shut down or long press for 3 seconds to shut
down when there is power.
Note:
Even if the device is turned off, the charging port can still work normally.
Screen Display
Getting Started
1.
After power on, the blue display will show Bluetooth and frequency flashing
alternately.
2.
After the pairing is successful, the screen displays Bluetooth will be on.
3.
Long press the button to enter the frequency modulation mode (display
digital frequency
).
