Once the baby camera and Parents Control Unit are both switched on, they will be
paired automatically. If not, follow the steps below:
Note:
The Parent Control Unit can only show the viewing of 1 camera at a time. You can
can connect up to 2 cameras to each Parent Control Unit ( Additional Camera
Sold Seperately)
Note:
The Recorded videos can only be viewed on a computer or seperate device.
Simply remove the SD card and use a Micro SD Card Adapter or use a card
reader. (Not included)
Format a new Micro SD Card by turning on the camera, press and hold the
Pairing
button for 3 seconds. When the blue light flashes twice, the formatting
is completed and you can start recording videos.
5. Pairing
6. Formatting Micro SD Cards
•
Enter Pairing mode by turning on the camera, double press the power button
until the blue light flashes quickly, release the button.
•
On the Parent Control Unit, press the home button to get to the menu.
Press or to select which camera to pair and press
to confirm.
•
Once you choose which camera to pair, the red light in the upper left corner of the
display will flash, when successful the flashing will shop and the display will show
the video stream of the camera.
•
If there is no connection for 10 seconds, the pairing mode will automatically end.
Redo the steps if not successful.
•
To switch between or , press the button on the Parent Control Unit to
return to the main menu and press the button.
10
