4
1
Trimmer base with calibrated grid
2
Metric and Imperial scale guide
3
Magnetic Back Stop
4
Rotary blade / handle assembly
5
Cutting Edge Guide
6
Safety cutting mat
7
Manual clamp
8
Paper Guide
m
NOTE: Please retain this information regarding
safe operation of this paper trimmer
m
CAUTION: Trimmer should be operated by an
adult or under adult supervision
m
CAUTION: Sharp blade, do not touch the edge of
the blade
Cutting restrictions
• Remove staples, paper clips etc. before cutting.
• Do not cut metal film, film containing glass etc.
• Do not cut more sheets than cutting capacity allows.
• Do not carry trimmer by holding on to the cutting blade
handle.
• Always operate trimmer with both hands and on a stable
base or desk.
• Check the fittings of the rotary blade and safety cutting rail
from time to time.
Specifications
SmartCut™ A515pro
2101967
30
380mm
A4, A5, A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
Models
Product code
Sheet Capacity 80g/m
2
*
Cutting Length
Integrated Paper Guide
Size Guide
Score
Perforate
SmartCut™ A525pro
2101968
30
457mm
A3, A4, A5, A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
SmartCut™ A535pro
2101969
30
609mm
A3, A4, A5, A6 & A7
Centimetres and Inches
1-5 sheets
1-5 sheets
* refer to paragraph 5 in the
Operating the Trimmer
, section D.
Operating the trimmer
1
Place the trimmer on a stable, flat surface such as a
table.
2
A.
Slide the rotary blade housing to the top of the
stationary rail.
A1.
To change cutting style push and
hold the blade selector knob while turning to select the
function desired.
3
B.
Raise the clamping handle and place the sheets (30
sheets Max.) to be trimmed at the desired position.
4
C.
Hold sheets securely in place and lower the clamping
handle.
5
D.
Push down on the rotary blade housing and slide
to cut. Several cutting passes may be necessary to
completely cut through all sheets depending on the load
inserted.
TIP:
In addition to using the grid pattern and scale for
alignment, use the transparent cutting edge guide to
quickly and accurately align your cuts.