DEM Page 27 of 43 FEBRUARY 07
CUTTERS AND STRIPPER REPLACEMENT
1. Remove the cutting head (section 2, page 7) and gearbox and sideframe assembly
(section 2 page 8).
2. Remove the 1/1 gears and gearbox cover assembly.
3. Prise open the locking washers and unscrew the locknuts on both shafts. Remove the
collars from both shafts and lift away the paper guide plate and infeed extensions.
4.
NOTE
: The assembly order of cutter s and stripper and remove cutters and strippers as
required.
5. Reassemble the new cutters and stripper onto the shafts in the original order of assembly
(i.e in stacks of 4 components).
6. Reassemble the cutting head and test the operation.
7. Adjust the cutter clearance (section 2 page ) as necessary to give a good quality cut.
PAPER SHREDDER S16 SECTION 9
SERVICE INSTRUCTIONS
Summary of Contents for S16
Page 21: ...DEM Page 21 of 43 FEBRUARY 07 ...
