Rexel AUTO 100M, Manual

Page: 10 / 114

GB
10
register this product online at
www.accobrands.com
lubrication of the shredder
Only use Rexel Oil Sheets to lubricate ACCO Brands accepts no liability for
product performance or safety when other types or brands of lubricants are used on any part s of
this machine Rexel recommend using an oil sheet after the bin has been emptied three times and
for ongoing three bin cycle thereafter Insert the oil sheet into the manual feed slot and NOT in the
auto feed chamber Using an oil sheet in the auto feed chamber will contaminate the feed rollers
preventing the auto feed mechanism shredding Follow the maintenance instructions if the rollers
become contaminated.
5. maintenance
The rollers on the auto feed mechanism may become dirty over time please wipe clean with a dry
cloth to maintain maximum product performance
service
We recommend these machines are serviced every to months by a Rexel service engineer
see back of this booklet for the contact details of your local service centre and for enquiries about
maintenance contracts.
over heating
If the Auto X is used continuously for over minutes the shredder may overheat and the cool
down indicator will ash red Please allow the shredder to cool down When the shredder is
ready to be used the thermometer symbol will no longer illuminate If the shredder needs to cool
down while shredding no action is needed The shredder will automatically restart shredding paper
once it has cooled down after periods of continuous use All you need to do is ensure paper is
loaded into the chamber and the bin is empty when the machine is cooling down
rare occasions of jamming
In the unlikely event of the shredder jamming the Auto X will stop shredding Check that the bin
is not full then try clearing the jam using the reverse and continuous jam boost switch
then return to Auto mode If this is unsuccessful follow the reverse function instructions
4. bin full
Should the shredder stop shredding the bin may be full Check rst by looking through the viewing
window and if full you should empty the bin
Pull open the bin slowly to empty
Push the empty bin back into place and the machine will resume shredding
bin or loading door open safety function
As a safety precaution if the bin or loading door is opened during shredding the shredder will stop