Rex Silentium Seg H Pistol Quick Start Manual Download Page 1

WARNING!

DO NOT SHOOT HOLLOW POINT 

OR EXPANDING

AMMUNITION THROUGH THE 

WIPE!

ONLY SHOOT FULL METAL 

JACKET AMMUNITION WHEN 

USING THE WIPE

Rex Silentium, Inc.

Bozeman, Montana

406-624-0669

www.RexSilentium.com

(C) Copyright 2019

All Rights Reserved

SEG H PISTOL Suppressor Instructions & Configurations

Summary of Contents for Seg H Pistol

Page 1: ...G AMMUNITION THROUGH THE WIPE ONLY SHOOT FULL METAL JACKET AMMUNITION WHEN USING THE WIPE Rex Silentium Inc Bozeman Montana 406 624 0669 www RexSilentium com C Copyright 2019 All Rights Reserved SEG H PISTOL Suppressor Instructions Configurations ...

Page 2: ...ON and place inside the BOOSTER CAGE then place RETAINER over the PISTON 8 Align the pin on the BOOSTER CAGE with any of the coaxial holes on the RETAINER and place into first 9 SEGMENT with serial number and tighten Place 17 4 BAFFLE into first SEGMENT as shown Push gently to be sure that BOOSTER CAGE pin and 10 RETAINER are properly aligned If you see the PISTON protrude from the RETAINER while ...

Page 3: ...RETAINER THREAD ADAPTER BOOSTER CAGE 17 4 BAFFLE ALUMINUM BAFFLE END CAP WIPE OPTIONAL ENGRAVED SEGMENT SPACER 3 4 24 THREADED RETAINER THREAD ADAPTER COVERT CONFIGURATION OMIT PISTON SPRING AND BOOSTER CAGE USE OPTIONAL FIXED BARREL KIT RETAINER SPACER AND THREAD ADAPTER Rex Silentium Inc Bozeman Montana 406 624 0669 www RexSilentium com C Copyright 2019 All Rights Reserved SEG H PISTOL Suppresso...

Page 4: ...CALIBER ENGRAVED ON THIS SUPPRESSOR INSTALLATION AND REMOVAL NEVER INSTALL OR REMOVE SUPPRESSOR ON A LOADED FIREARM Visually inspect and make sure the firearm safety is engaged verify firearm is unloaded and remove magazine if applicable TO INSTALL make sure muzzle threads and caliber correspond with the suppressor specifications Carefully thread the suppressor onto the muzzle threads Hand tighten...

Reviews: