REWIRE SECURITY 102-NANO, User Manual

Page: 10 / 24

5.8 Exact Street Address
You must set up the APN of your SIM card provider before using this function. If
your network requires a username and password for GPRS login, please refer to
sections 5.31 to configure the APN, username and password for GPRS login.
Command : password
Response : No 2, High Street, Bristol, BS1 2A
e.g.
address123456
5.9 Location-based service (LBS) / Cell-ID locating
If 102-NANO cannot establish a solid GPS fix, it will calculate its location using
Cell-ID GSM locating. Location reports will include the GPS coordinates of the last
known position as well as a LAC code. Entering the LAC code to the “Manual
Track” menu of web tracking platform will enable you to see the tracker’s current
location.
You can also send command “password” to the tracker to request exact
address. 102-NANO will automatically switch to tracking by LBS in GPRS mode.
The accuracy of LBS also known as Cell-ID tracking depends on the distance to
the nearest GSM Network Cell Tower or Base Station. In urban areas, this
accuracy usually varies between 25-100 meters.
5.10 Monitor (Voice Surveillance)
102-NANO is in tracking mode by default. When monitor mode is activated, it
will automatically answer incoming calls, rather than replying with location
information.
To activate monitor mode:
Command : password
Response : monitor ok!
e.g.
monitor123456
Now 102-NANO will answer your calls and you will be able to listen through the
built-in high sensitivity microphone.