Operating manual
Revox Joy App S232
21
Note:
Revox strongly advises against carrying
out a software update over Wi-Fi. Upload
the update file from the Revox website
onto a USB stick and then carry out the
update from the stick.
Once the update has started, the
progress of the process is shown in the
App. Then the Joy disconnects from the
App but the update is not yet complete.
Please wait until the Joy has ended the
update process, as shown by the LED
flashing permanently on the front panel.
Remote access
The Joy can be controlled through UPnP
Control points. Remote access has to be
activated for this to be possible.
Slide the switch to the "On" setting.
Clock
You can set Summer time, the offset to
the World time and the actual time
through this menu.
Please note that the Joy gets its time
from the Internet. If there is an Internet
connection, you cannot adjust the time
as the time from the Internet has a
higher priority.
Language
Finally, you can set the language of the
Joy. Tap the button with the current
language and you are presented with a
list of the languages available on the
Joy.
Select the desired language. Once you
have made your choice, the Joy is
restarted and is not available in the
network for a short time.
Note:
If you should deploy the S208 Remote
control and the App at the same time, it
is important that same language is
defined on both devices as otherwise
conflicts can occur. The remote control
has the priority.
