4
EN
Start Up
To start your quadcopter, follow this starting sequence:
1. Power on the transmitter. The transmitter beeps.
2. With the quadcopter on a level surface, power on the quadcopter. The
quadcopter LEDs fl ash.
3. Fully raise the
THROTTLE
stick. The transmitter emits one short beep.
4. Fully lower the
THROTTLE
stick. The transmitter emits one long beep.
5. After the beep, binding is successful. The quadcopter LEDs stay solid.
Operation and Control
NOTICE:
When the quadcopter is fl ying toward the user, control direction is reversed.
Some drifting during fl ight is normal. The quadcopter may become unresponsive at the end of the battery life. To recharge the
battery, follow the
Battery Charging
instructions.
Motor Start
To fl y your quadcopter, press the
THROTTLE
stick to the left-bottom and the
CONTROL
stick to the
right-bottom. The motor starts. Or you can press the
Right
button once to fl y the quadcopter.
Motor Stop
To stop your quadcopter, press the
THROTTLE
stick to the right-bottom and the
CONTROL
stick to the
left-bottom.
Auto Takeoff / AutoLand
Press the
Left
button once, and the quadcopter will take off automatically.
Press the
Left
button once, and the quadcopter will land automatically.
NOTICE:
In the event of a crash, the quadcopter motors will stop automatically to prevent motor damage.
NOTICE:
If the LED lights on the quadcopter fl ash continuously, when NOT fi lming video, it indicates low battery and may
not fl y properly or perform fl ips.
NOTICE:
The quadcopter’s fl ying range is 30m. If you fl y beyond this
range, the transmitter signal will be lost.
Flight Control