16
MOTION SETUP
SENSITIVITY : 6
POSITION : ALL
DELAY : 00 SEC
OUTPUT : OFF
HOLD TIME : 03 SEC
EXIT(ESC TO EXIT)
Set SENSITIVITY: 1~10
Set POSITION: ALL, CENTER
Set DELAY: 0~5 SEC
Set OUTPUT: OFF,OUT, RELAY
Set HOLD TIME: 3~99 SEC
Select
“AE SETUP” and pushing the
Joystick
left or right. Then the AE setup displays. Refer to the AE
SETUP in the camera setup.
6. Set Preset Pan/Tilt Motor Speed (1~8 Step)
7. Set
“DWELL TIME” (03-99second)
8. To select the next page of presets, scroll the page by pushing the
Joystick
to the Left
on the first and last columns of the menu.
9. Repeat steps 2 through 7 for each additional preset position.
10. Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the Preset menu without
saving.
NOTE: Press the HOME key at programmed preset position(*) to delete a programmed preset view.
The position, which is marked with
*
, already has the preset view assigned. To review the stored preset,
press
PRST
key on the
*
，
The camera will show the stored preset scene.
Hold down the
CTRL
key while selecting the desired scene using the
Joystick
. Current position will be
displayed. Release
CTRL
key to complete. Or Press
IRIS Open
then the
“CTRL” displays. Move the
desired position and the zoom position. Press
IRIS Close
then the
“CTRL” disappears. Select Exit and
push the
Joystick
to the right.
PRESET AREA SETUP
(CTRL KEY)
NUMBER 001
PAN TILT
000.0 000.0
EXIT(ESC TO EXIT)
