USER’S MANUAL
Trouble Shooting
POSSIBLE CAUSE
☞
Check the power cable, power supply output and video
connection between the camera and monitor.
☞
Are the camera lens or the lens glass dirty?
Clean the lens / glass with a soft clean cloth.
☞
Adjust the monitor controls, as required.
☞
If the camera is facing a very strong light, change
the camera position.
☞
Adjust the lens focus
☞
Adjust the contrast control of the monitor.
☞
If there is an intermediate device, correctly set the 75
Ω
/Hi-z.
The camera is not
☞
Check the camera is correctly connected to an appropriate
regulated power source.
☞
Has MOTION DET been set to ON in the menu?
☞
Has MD AREA been properly defined?
☞
Check the settings in WHITE BALANCE menu.
☞
Make sure that the camera isn’t facing direct sunlight or
Fluorescent lighting. If necessary, change the camera position.
●
working properly
the camera is hot.
Motion Detection
is not activated.
The color of the
picture is not correct.
The image on the
screen flickers.
The SENS-UP does
not work.
20
PROBLEM
Northing appears on
the screen.
The image on the
screen is dim.
The image on the
screen is dark.
and the surface of
☞
Check that the AGC setting in the EXPOSURE menu isn't set to OFF.
☞
Check the EXPOSURE menu and make sure SHUTTER is set to------.
