Revo CW-SR1500-A Quick Start Manual Download Page 4

Attaching the Counterweight to the SR-1500 Shoulder 

Support Rig

Note: It is recommended that you attach all accessories to 

the support rig before mounting the camera.

1

Attach the mounting plate by inserting the two 

included screws through the mounting plate and into 

the threaded holes of the counterweight. Tighten them 

with the included wrench.

Important: the screws should turn easily into the holes 

of the counterweight. If you feel resistance when 

turning the screws, turn the counterweight over and 

repeat the previous instruction.

Either set of holes on the mounting plate can be 

used depending on your preference. Using the holes 

in the center of the mounting plate will make the 

counterweight feel heavier.

Reviews: