...........................................................................
7 |
P a g e
Connecting To Your Network
n
Extend the antenna on the rear of your radio.
Press the
button to power-up BLIK
Radiostation.
n
After a few seconds this message will change
to a welcome message.
n
For initial use, Press
button to scroll
up and down each mode or simply press
MODE
button to enter.
n
Press
button to select INTERNET
RADIO, and press the
SELECT
button. Then
the display will show a list of region for your
choice.
n
In some cases BLIK Radiostation may find
more than one network. Use the
buttons to see the names of each one
–
and
press the
SELECT
button when the name of
your own network is displayed.
n
If your network is not configured to request a
password (WEP/WPA), BLIK will connect to
the network and display:
n
If a WEP/WPA key (password) is required,
BLIK will display the following:
n
After a few seconds, BLIK will ask you to input
the WEP/WPA code and will display the
password entry screen as follows:
n
Use the
buttons to cycle back and
forward through the alpha-numeric character
list. Press the
SELECT
button to select a
character.
Please note: WEP/WPA pass codes are
case-sensitive.
n
If you make a mistake while entering your
password, select
icon to delete a
character.
n
Select
for last or next line
n
Select
icon
for return.
n
After selecting the final character of your
password, scroll to the icon and press the
SELECT
button to enter your code. BLIK
Radiostation should now successfully connect
to your network.
n
BLIK
Radiostation
will
automatically
remember the WEP/WPA code for your
network, and other networks you have used
previously. You will not need to re-enter these
codes in the future.
Summary of Contents for blik
Page 1: ...w w w r e v o c o u k...