FEATURES
A. PEDICURE FOOT REST
B. WATERPROOF TOE-TOUCH CONTROL
C. REMOVABLE PUMICE STONE
D. BUBBLE STRIPS
E. MASSAGE ROLLER
F. ACCUNODE MASSAGE PAD & ACCUNODE BASIN
G. ANTI-SPLASH HOOD
OPERATING INSTRUCTIONS
This appliance is intended for household use only.
The appearance of this appliance may differ from the illustration.
Only use this appliance for its intended purpose as described in this manual.
Do not use attachments not recommended by the manufacturer.
HOW TO USE
Place the appliance on a flat, level, solid floor.
FILLING THE UNIT
1.
Before filling the unit ensure that it is not plugged into the mains.
2.
Fill the unit with water at the desired temperature.
3.
The water level indicator on the inside of the footbath (maximum filling level of
approx. 1.9 liters) should not be exceeded.
4.
For any usage, the appliance should always be filled with water.
NOTE:
This footbath cannot be used without water. It is NOT intended for dry
operation.
SWITCHING ON
1.
Connect the appliance to the mains.
2.
Sit in a comfortable position and then place your feet in the foot spa.
3.
Always place your feet in the foot spa or remove them from the spa while in a
sitting position.
4.
Never use the appliance in a standing position or stand up in the unit, as too much
pressure will cause the unit to crack.
5.
To start the unit, depress the waterproof touch-toe button marked (
).
The bubble jet strips will begin to emit bubbles.
Whilst the unit is turned ON, the unique ‘keep warm technology’ will help to slow the
natural cooling of the water contained in the foot spa.
NOTE:
The ‘keep warm technology’ feature avoids a rapid cooling down of the water.
It is NOT suitable for heating cold water. You must begin with water at the desired
temperature.
Refreshing bubbles in the water caress the feet gently and massage the skin.
Ten minutes daily is sufficient to feel refreshed. The length of the massage and the
frequency of use can be increased if necessary.
AFTER USE
1.
When you have finished, turn the appliance OFF by pressing the waterproof
touch-toe button marked (
) again, and remove the plug from the mains.
2. Hold the appliance on the sides of the unit and pour the water out.
NOTE: The footbath should be emptied through the convenient draining spout
opening at the front of the unit.
CLEANING -
Rinse the unit with water and a mild cleaning liquid and dry. Wipe with
a soft, damp cloth.
DO NOT
use an abrasive cleaner. Keep away from all solvents and any harsh detergents.
DO NOT
immerse the appliance in water.
STORAGE -
Always unplug when not in use.
Always store in a dry location. Do not pull or twist the cord. Do not wrap the cord
around the appliance, as this may cause the cord to wear prematurely and break.
Regularly check the power cord for wear and damage (particularly where it enters the
appliance and the plug).
C
D
B
E
G
A
F
