Pairing Your Headset
In order to use your RevJams Active Pro Bluetooth
Stereo Earbuds with a Bluetooth-enabled device,
you will first need to pair the two.
1. Place the headset and the mobile phone where
they are easily viewable and no more than 3 ft. apart.
2. Ensure that the headset is fully charged
3. Ensure that the headset is turned off (Very
important)
4. Press the Pairing button (middle multi-function
button) for approximately 8-9 seconds until the RED
AND BLUE LIGHT FLASH ALTERNATELY which
indicates that you are in Pairing Mode.
(Note: A blue light will turn on at first but keep
pressing down on the pairing button until it changes
to a flashing blue/red light which indicates that you
are in pairing mode)
